Electrical Connection - Baumatic BDW01 Instruction Manual

BAUMATIC BDW01 dishwasher user manual
f) NOW YOU ARE READY TO CONNECT THE
POWER CORD.
ELECTRICITY CAN BE DANGEROUS. PLEASE READ THE FOLLOWING

ELECTRICAL CONNECTION

Electrical Requirements
The dishwasher is designed for operation on an adequately wired individual 220-240V AC,
50-60Hz system. The required fuse rating is 13amp. Fused electrical supply is required –
copper wire only. Time delay fuse or circuit breaker is recommended. Make sure that this
appliance runs off its own separate circuit. Outlet should be placed in adjacent cabinet.
WARNING – ENSURE PROPER GROUND EXISTS
BEFORE U SE .
After making sure that the voltage and the frequency values for the current in your home
correspond to those on the rating plate and that the electrical system is sized for the
maximum voltage on the rating plate, insert the plug into an electrical socket which is earthed
properly. If the electrical socket to which the appliance must be connected is not right for
the plug, replace the socket, rather than using adaptors of the like as they could cause
overheating and fire.
WARNING!
CAREFULLY :
29
29