Skip Channel Setting; Tone Scan - Alinco DJ-S40 Instruction Manual

5. Advanced Operations

5-1-3 Skip Channel Setting

Memory channels that have "skip"
programmed will not be scanned during
memory scanning. Refer to page 17 for
the setting method.
In the memory channel where a memory
skip is programmed, "SKIP" appears on
the display. The CALL channel is also a
skip channel.

5-1-4 Tone Scan

This is a function to help you find the tone
signal frequency of a received tone signal.
1. Press and hold the L/M keys for 1
to 2 seconds in the tone squelch setting
mode.
Scanning starts and the decimal point
blinks.
38 different Tone Frequencies are
scanned in order.
If a tone signal frequency is found,
scanning stops and you can hear the
received signal.
Scanning will not resume until the L/
M keys are pressed again.
2. After scanning stops, the Scan mode
is canceled by pressing the PTT key,
the FUNC key or the V/M key.
24