Transmitting - Alinco DJ-S40 Instruction Manual

3. Basic Operations

3-7 Transmitting

1. Select the desired frequency.
2. Press and hold the PTT key, speak into
microphone with normal loudness and
tone.
The S meter indicates the unit is in the
transmitting mode.
Speak into the microphone from a
distance of approx. 5cm.
3. Release the PTT key to stop transmitting and to return to the receiving mode.
Reference: A Tone call signal is transmitted by pressing and holding the
16
PTT key and pressing the MONI key (There are five tone call
signals that are selectable in the Setting mode).
If the PTT key is pressed when the frequency is outside of the
transmitting range, "OFF" appears on the display. When such
is the case, transmitting will not occur. Be sure you are within
band limits and that any offset you have selected allows your
transmitted signals to remain within the designated band.