Power Cable Connections And Switching The Power On/Off; Operating - 3M PX5 User Manual

Power Cable Connections and Switching the Power On/Off

There is an order in which the power cable is connected and the power is switched on/off.

Operating

1
Connect the AC IN connector of the projector and the power outlet using the supplied power cable.
The STANDBY indicator will light in amber, and the unit will enter the standby mode.
STATUS STANDBY
Lit amber
2
Turn the lens cover clockwise.
When the lens cover stops with a click, the
projector is ready for projection.
1
3
Switch on the projector power
Press the STANDBY button.
STATUS STANDBY
The first time the power is switched on after purchase, [Menu
Language Select] will be displayed. See Page E-20 for informa-
tion about language selection.
• When the power is turned on, the STANDBY indicator starts flash-
ing green, then stops flashing after about 60 seconds. If the STATUS
indicator lights green at this time, the lamp mode is set to "Eco".
See E-26 and 48 for instructions on selecting.
• If the power does not come on, see "When the STATUS Indicator is
Lit or Flashing" on Page E-54.
If the "Password" input window is displayed: See E-31.
A password is set for this projector.
The projector cannot be used unless the correct password is input.
To turn off the power: See E-21.
The projector is now capable of regular projection.
Note:
The image can be muted quickly by closing the lens cover while the image
is being projected.
4
Switch on the power of the connected equipment
Note:
• When the power plug will be unplugged from the power outlet, please place the projector near the power outlet so that it may be reached
easily.
• Press the STANDBY button after the STANDBY indicator is lit in amber.
• The included power cable is exclusively for use with the PX5. Never use it with other products.
(button on main unit)
Firmly plug in all
the way.
This indicator is also lit green in Eco-mode.
STATUS STANDBY
Lit amber
E-19
To wall outlet
2
STANDBY
MENU
RGB ENTER
VIDEO CANCEL QUICK
Q
STATUS STANDBY STATUS
Flashing green
Lit green
(Approximately 60
Power is on
seconds)
STANDBY