Connections With Component Signals; When The Video Equipment Has A Ycbcr Connector Or Ypbpr Connector - 3M PX5 User Manual

Connecting Personal Computers and Video Equipment

Connections with Component Signals

When the Video Equipment Has a YCbCr Connector or YPbPr Connector

• The projector has been set to "Auto" at the factory; however, if it does not project, please change the input setting to "Compo-
nent" using the menu sequence of [Setup] → [Input Format] → [RGB].
See "Input Format" on Page E-49.
• When projecting the YCbCr signal or YPbPr signal, if the color of the overall image strongly leans toward being greenish or
another color, change the setting under the menu of [Color] → [Color Space].
See "Color Space" on Page E-43.
Component cable (Available as an option)
(Mini D-sub 15-pin to RCA 3)
(No.78-8118-8843-3)
Component cable (Available as an option)
(Mini D-sub 15-pin to RCA 3)
(No.78-8118-8843-3)
Green
Blue
Red
E-17
Green
Blue
Red
Y Cb
COMPONENT
COMPONENT
Y Pb
Cr
Pr