Changing User Registration - Konica Minolta bizhub PRESS 1250/1250P User Manual

2.3 User Authentication in Enhanced Security Mode
2.3.2

Changing User Registration

Follow the procedure below to change the user name and password to be required for user authentication in
Enhanced Security mode.
1
Press Utility/Counter on the control panel to display the Utility Menu Screen.
2
Press [04 Administrator Setting].
A password entry screen will be displayed.
3
Enter the administrator password.
Use the touch panel keypad to enter the administrator password consisting of 8 alphanumeric charac-
ters and symbols, then press [OK].
% The alphabetic characters are case-sensitive.
% If a wrong password or fewer than 8 alphanumeric characters/symbols are entered and [OK] is
pressed, the warning message [Password is incorrect / Please wait for a while] will appear, and no
key will work for five seconds. Enter the correct password after five seconds.
% The information on failed authentication will be saved in the audit log.
The Administrator Setting Menu Screen will be displayed.
4
Press [03 User Auth./Account Track].
bizhub PRESS 1250P
2
2-13