Table of Contents
Advertisement
Chapter 4 Remote Interface Reference
Command Summary
Command Summary
This section summarizes the
Programmable Instruments) commands available to program the meter.
Refer to the later sections in this chapter for more complete details on
each command.
Throughout this manual, the following conventions are used for SCPI
command syntax. Square brackets ( [] ) indicate optional keywords or
parameters. Braces ( {} ) enclose a list of parameters separated with a
vertical bar ( | ), use only one of the values. Triangle brackets ( <> )
indicate that you must substitute a value for the enclosed parameter.
The actual command string you send to the meter should not include
any of the conventions indicated above.
First-time SCPI users, see page 183.
(Standard Commands for
SCPI
4
117
- Quick Links:
- To Measure Resistance
Hide quick links:
Advertisement
Table of Contents
