HP 635n - JetDirect IPv6/IPsec Print Server How To Use Manual page 84

Here we can see that the Server Hello was sent (packet 68) and it must have been accepted
because Jetdirect sends the client certificate (packet 69) and did not send a NAK. However, after
the client certificate is sent, the Authenticator returns a TLS Alert indicating "Access Denied". There
are a few of things to check:
• The Jetdirect Identity Certificate must be configured
The Jetdirect Identity Certificate must be one the Authentication Server Trusts
•
• The Jetdirect user in Active Directory must have Jetdirect's certificate mapped to the
account that represents Jetdirect.
PEAP
Almost everything we've covered with EAP-TLS is also valid for PEAP. Let's look at a successful
PEAP negotiation.
84