Control Pad Features - Kenmore 4802 - Elite 27 in. Wall Oven Use And Care Manual

Control Pad Features
Note: The appearance of your oven control may differ slightly from the one illustrated below. However, all functions are
the same. Also, push buttons or pads may be shaped differently than those appearing in this Use and Care Guide.
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become
familiar with the various functions of the oven as described below.
CLOCK SET UP and DOWN ARROWS PADS Used BAKE PAD--
PAD--Used along with the function pads to select oven Used to select the
to set the time temperature, cook time, start time (when bake function.
of day. programming an automatic start time),
time of day, clean time and minute timer.
TIMER SET/OFF
PAD-- Used to set
or cancel the minute
timer. The minute timer
does not start or stop
cooking. Also, TIMER
SET/OFF Pad is used
to set the Continuous
Bake Feature.
COOKTIME
PAD--Used to enter
the length of the
baking time.
® ® ®
Co:_k
il
@ @ OVFN @
D_!l/_y @
P/_ k Fgl
¢idnc
@ L_(IOR LOCI ED .....................................................
FEATURE iNDiCATOR
LIGHTS-- These light to
which feature is in use.
BROIL PAD-- Used
to select the variable
function.
SELECT CLEAN
PAD--Used to select
the Self-Cleaning
cycle. A 2 or 3 hours
time may
be selected.
DELAY START
to set the desired start time
for baking. May be used with
COOK TIME to program a
delayed bake cycle.
OVEN, PREHEAT & DOOR LOCK LIGHTS*--The "Oven" light
will glow each time the oven unit turns on to maintain the set oven
temperature. The "Preheat" light will glow when the oven is first set
to operate, or if the desired temperature is reset higher than the actual
oven temperature. The "Door Locked" light will flash until the door locks
when the self-clean cycle is in use. it glows constantly after the door
locks.
STOP CLEAR PAD-- Used to clear
any function previously entered except
the time of day and minute timer. Press
STOP CLEAR to stop cooking. Also the
STOP CLEAR pad is used to activate
oven lockout setting.
*NOte: The OVEN indicator ight on the electron CdiSplay Will turn ON and OFF when using the Bake feature and
during preheaL This is normal and indicates that the Oven is cycling to maintain the selected baking temperaturel
When the preheat indicator light turns OFF,
For a silent control panel
When choosing a function, a beep will be heard each time a pad is pressed, If desired, the control can be programmed
for silent operation, Press and hold After 7 seconds, the control wil! beep once, This will block the controls from
sounding when a pad is pressed, To return the sound, press and hold again for 7 seconds until the control beeps
once.
Note: The control will return to the audible mode after a power outage.
Temperature conversion
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be
programmed for any temperature from 170°F to 550°F (77°C to 287°C).
To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):
1. Press _i::_ .... appears in the display.
2. Press and hold the J% until "HI" appears in the display.
3. Press and hold _t until °F or °C appears in the display.
4. Press the _ or V to change °F to °C or °C to °R
5. Press any control pad to return to normal operating mode.