Table of Contents
Advertisement
Contro
Button Features
READ THE iNSTRUCTiONS
CAREFULLY
BEFORE USING THE OVEN.
For satisfactory use of your oven, become
familiar with the various features and functions of the oven as described bebw, Detailed instructions
for each feature
and function
follow later in this Use & Care Guide.
SELECTOR
CONTROL
KNOB- Used to select the Bread
Proof, Warm & Hold, Bake, Convection
Bake, Cenvection
Roast, Broil or Clean Feature.
BREAD PROOF--
Used to set the Bread Proof feature.
WARM & HOLD --
Used to set the Warm
Hold feature.
CONVEC'RON
BAKE--
Used
ROAST--
to select the
Used to
bake function.
select the
convection
OVEN INTERIOR
roasting
LIGHT PADS--
mode.
Used to turn
oven interior light
CONVECTION
ON and OFF.
BAKE--
Used to
select the Convection
Bake feature.
OVEN TEMPERATURE
CONTROL
KNOB--
Used
to select the Bread Proof, Warm & Hold, or the
required Bake, Convection
Bake, Convection
Roast,
Broil or Clean Temperature.
OVEN TEMPERATURE
INDICATORS
-- These
the Self-
indicators
shows the current
temperature
in the oven.
CIeaning
cycle,
TIMER PADS--
Used to set or
cancel the
CLOCK SET
minute timer.
PAD-- Used
The minute timer to set the
time of day.
does not start or
stop cooking.
CONVECTION
CONVERT
Used to select the Convection
Convert feature.
PROBE
PAD--
Used
to set the
Probe
feature.
CLEAN--
Used to select
Lower
Oven
i,:
2 "
BROIL--
Used to
select the
broil function.
SCROLL
PADS--
Used to scroll
up or down
for many
functions.
Setting the C ock
Clo_k
The
button is used to set the clock, Until the clock is set, aii the other oven functions wiii not be available, The clock may
be set for 12 or 24 hou rtime of day operation, The clock has been preset at the factory for the 12 hour operation, When the range
is first plugged in, or when the power supply to the appliance has been interrupted, the display will flash with "PF",
Cl_k
When PF flashes in the display, press the :_
button No other button will stop the time from flashing,
To set the dock
1,
Press the i_iil/button.
The control will beep once and the time of day will appear in the display,
2,
Tosettheclocktothecurrenttimeofday,
pressthe
_;,</or
buttontoincreaseordecreasethetimeofdayinl
minute
increments, or keep the
or
button pressed to increase or decrease the time of day in 10 minute increments,
3,
Release the button when the desired time is reached, Wait 5 seconds and the change will be accepted,
Changing
between
12 or 24 hour time of day dispnay
1,
Pressandhodthe/_buttonfor6seconds
Thedspayw
showeither"12"(for12hourclock)or"24"(for24hourclock),
2,
Press the
or v;/button
to switch between the 12 and 24 hour time of day display,
3,
Wait 6 seconds to accept the change,
Advertisement
Table of Contents
