Table of Contents
Advertisement
LaCie 5big Network 2
User Manual
4.18. Update Product Software
LaCie may improve your network hard drive's software or add new
features over time. See below for updating information.
Note that you can always restore your drive to factory defaults by
following the procedure in
4.19. Reset to
4.18.1. Method 1: Auto-Update
Your network hard drive is by default configured to obtain the latest
software updates through the internet. The Support page of your
product's Dashboard will check if updates are available and install
them if you wish.
Alternatively, if you prefer to update your drive manually or are on
a restricted network, you can accomplish this using LaCie Network
Assistant
(4.18.2. Method 2: Update with LaCie Network Assistant
Software).
1. Open
Dashboard >
Support.
2. In the Auto-Update box, click the gray downward-facing arrow
to check for a new update
3. If an update is available, the download will begin automatically.
4. Once the download has concluded, click the
87).
5. The drive will reboot and will therefore disappear from the net-
work temporarily
(Fig.
88). When it reappears, you can verify the
new software version on
Dashboard >
• DESIGN BY NEIL POULTON
Factory.
(Fig.
86).
Install
button
Support.
Administering Your LaCie 5big Network 2
Fig. 87
(Fig.
Fig. 88
Fig. 89
page 57
Advertisement
Table of Contents
Troubleshooting
