LaCie 301297U - 1TB Ethernet Disk XP Embedded Network Attached Storage Online Manual page 55

LaCie Ethernet Disk
User's Manual
Issues
How do you back up the LaCie Ethernet
Disk?
How do you grant access to a few users,
while restricting others, on the same
network?
A share cannot be created with a specific
name.
Why does Windows sometimes report
inaccurate free space?
Possible Solutions
The LaCie Ethernet Disk can be backed up to a direct-attached hard drive using
the included backup software program.
Alternatively, the LaCie Ethernet Disk can be backed up over the network from a
workstation or a remote server, with a connected backup device, such as a tape
drive or hard drive.
The easiest way to achieve this is to create a group, and then assign permission
and grant access to only that particular group.
Make sure that there is not an existing share with the same name. Go the Web
Administration Page and click on the Share tab to verify that there is not a share
with that same name. Even if you cannot see the share, it may exist on a
removable mass storage device. If this is the case, and the device is not plugged
in, the share names will still be in the registry of your LaCie Ethernet Disk. In this
instance, you will need to delete the "broken share" (see
Broken Share for more information) before creating the share again.
Some Windows clients are unable to recognize disk space in excess of 2GB.
This only affects the display, and not the "real" available free space.
Install the LaCie Ethernet Disks individually, one at a time. Make sure that you
change the name of the LaCie Ethernet Disk before installing the next one. There
will be a conflict if the names are not unique.
12. Troubleshooting
page 55
8.3.4 Deleting A