LaCie Ethernet Disk
User's Manual
3) An administrator log on will be prompted. Type in admin as the password. This is the default administrator password for
the LaCie Ethernet Disk.
After processing the information, the LaCie Ethernet Disk will reboot with the new network parameters.
Once you have finished this operation, you should not have to use the LaCie Network Configurator again, unless you have
forgotten the IP address or you are moving the LaCie Ethernet Disk.
Once the network parameters have been set, the LaCie Ethernet Disk is ready to be accessed by users. Users will have access
to the default folder called "public." Any user can log on as the default user, with the username "myuser" and the password
"myuser." To learn more about adding and modifying shares, creating and modifying Users and Groups, please refer to
sections
7. Using The Web Administration Page
5. Configuring Your LaCie Ethernet Disk
and 8.
Advanced Management Of Users, Groups And
Page 17
Shares.