LaCie Ethernet Disk
User's Manual
6) When you see the words "5. Ready" displayed in bold,
click Shutdown.
7) When prompted, disconnect the USB CD-ROM drive, and restart the system by pressing the power button on the front of
the Ethernet Disk.
Important Info:
The system will put itself through a number of reboots; DO NOT interrupt the system during these
reboots.
After the final reboot the system will display the LaCie Ethernet Log On Screen.
When the Ready Light on the front of the Ethernet Disk comes on, the restore process is complete.
8) Use the LaCie Network Configurator to configure your Ethernet Disk.
9) Using a Web browser access the Ethernet Disk and apply any LaCie Ethernet Disk software updates needed to restore the
Ethernet Disk software up to the latest version.
10) Finally, restore your data from backup.
14. Restoring Your Ethernet Disk Using The LaCie Restore CD
page 60