Connecting A Ups To The Dns-343 - D-Link DNS-343 - NAS Server - Serial ATA-150 Product Manual

Section 3 - Configuration
When a UPS (Uninterruptible Power Supply) USB management connection is connected to the DNS-343, the Status
screen hides the printer information and displays information about the UPS connected. The screenshot below shows
the Status screen when a UPS is attached to the DNS-343.
UPS Info
The UPS Information screen displays
information about the UPS Manufacturer
and the Product name.
Battery Charge
Battery Charge indicates the battery power
state of the UPS (not all UPS units support
this function)
Status
The Status field will display one of the three
messages below:
1. OL:This indicates that the UPS is
online.
2. OB: This indicates that the UPS is
running on battery, meaning that there
has been a power failure. The DNS-343
is consuming the battery power of the
UPS and any data should be saved
immediately to prevent any work being
lost.
3. LB: This indicates that the UPS has low
battery power.
D-Link DNS-343 User Manual

Connecting a UPS to the DNS-343

4