D-Link DNS-343 - NAS Server - Serial ATA-150 Product Manual page 28

Section 3 - Configuration
The DNS-343 supports the following configuration types: Standard, where each drive is a unique volume, JBOD, which
combines both drives in a linear fashion to create one volume, RAID 1 and RAID 5 with a Basic Configuration and a
combination of RAID 0/JBOD, RAID 1/JBOD and RAID 5/JBOD for Custom Configuration.
Click Re-configure All Existing Hard Drive(s) to
setup the RAID configuration.
Note: All data will be lost when changing the drive
configuration:
The following screen appears showing the disks installed in the system. This screen also allows the administrator to
choose a RAID configuration type for this device. Select either Basic Configuration or Custom Configuration.
Basic Configuration Custom Configuration
D-Link DNS-343 User Manual