Entry Into The Maintenance Mode - Brother FAX-8650P - B/W Laser - Fax Service Manual

1.

ENTRY INTO THE MAINTENANCE MODE

FAX3750/MFC7750: To make the equipment enter the maintenance mode, press the Function,
*, 2, 8, 6, and 4 keys in this order.
Within 2 seconds
FAX-8650P:
*, 2, 8, 6, and 4 keys in this order.
Within 2 seconds
The equipment beeps for approx. one second and displays "
LCD, indicating that it is placed in the initial stage of the maintenance mode, a mode in which the
equipment is ready to accept entry from the keys.
To select one of the maintenance-mode functions listed in Section 2, enter the corresponding 2-
digit function code with the numerical keys on the control panel.
maintenance-mode function are described in Section 3.)
NOTES: • Pressing the 9 key twice in the initial stage of the maintenance mode makes the
• Pressing the Stop key after entering only one digit restores the equipment to the
• If an invalid function code is entered, the equipment resumes the initial stage of the
To make the equipment enter the maintenance mode, press the Menu,
equipment exit from the maintenance mode, restoring it to the standby state.
initial stage of the maintenance mode.
maintenance mode.
V - 1
" on the
(The details of each