Printing Side 2 - Xerox 7300DX - Phaser Color Laser Printer Specification

Printing side 2

1. Insert the paper printed with side 1 into the tray. Depending on the size and type of paper, load the
paper long-edge feed or short-edge feed.
Long-edge feed
Place the printed side 1 faceup with the top of the
I
page at the back of the tray; (the side to be printed
is facedown).
Prepunched holes should be on your left as you
I
face the printer.
2. In the printer driver, select the tray containing the paper.
3. Send the job to the printer so that the even-numbered pages (side 2) are printed.
Phaser® 7300 Color Printer
Short-edge feed
Place the printed side 1 faceup with the top of the
I
page on your right as you face the printer; (the
side to be printed is facedown).
Prepunched holes should be at the back of the
I
tray.
Specialty Printing
16