Electrolux THERMALINE 900 Specification Sheet

Electrolux 900 thermaline h = 800 mm
Gas top on gas oven
The Electrolux 900-Thermaline of cooking equipment is designed very heavy duty requirements of hotels,
institutions, hospitals, central kitchens, in-flight kitchens and cruise ships. The series consist of a wide choice
of modular elements that can be installed as individual, free-standing units or assembled into a complete
cooking suite made virtually seamless by means of cleverly-designed connecting rails.
The models detailed on this sheet combine a gas burner top mounted on a gas oven, with models available for
operation from one side only or from both sides to suit a central cooking island. Installation options are floor
mounted on 100 or 200 mm high feet or a plinth which can be either steel or masonry construction.
EASY TO USE
• Five sizes of burners to suit
different cooking requirements
from rapid boiling to a gentle
simmer.
• Manual gas valves with fixed
high and low positions allow a
precise control of the flame
intensity.
• Large sized pan rests (380x380
mm) in enammeled cast iron with
long centre fins to allow the use of
the largest down to smallest pans.
• The level of the pan rests and
the appliance are the same which
means it possible to move pans
from one appliance to another
without lifting.
• Simple, convenient operation
with highly visible control panels
and knobs.
• Electric roasting and baking
oven for two GN2/1 shelves or
containers. Individual thermostatic
control to upper and lower heating
elements.
• Oven temperature up to 350°C.
• Thick steel base plate for the
even temperature distribution and
storage.
• Optional base plate with a fire
clay element provides a very
uniform distribution and long term
storage of the oven heat; it is
beneficial for sensitive patisserie.
• All appliances conform to ruling
European safety and hygiene
standards and are H marked.
• All models are type-approved by
an international standards
authority and are certified.
581074 with accessories
EASY TO MAINTAIN
• Flat spillage trays in AISI 304
stainless steel with cleaning
openings on front and rear side
with removable pan supports,
burner, rings and flame ignition
parts.
• Body, cupboard and rests are
made of AISI 304 stainless steel.
• No gaps or dirt traps between
adjoining appliances when
connecting rails are fitted.
• All major components may be
easily accessed from the front.
• The appliances are IP X5
certified against water jets.