2
Operation and Features
Testing Diodes
38
The diode testing function has the following features:
• Uses a 1 mA ± 0.2% constant current source.
• Open circuit voltage is limited to less than 4.5 V for all
ranges.
• Response time is 60 samples/second.
Make the connection as shown below.
Forward bias
Agilent Measurement Manager operation
Select the Diode
updated continuously.
SCPI commands
The following example shows how to make a Diode Test
measurement using SCPI commands.
MEASure:DIODe?
function. The reading is displayed and
U2741A User's Guide