Advertisement
CIS-209
July 2000
CURRENT INFORMATION SUMMARY
Wind Off
Check the frame counter window.
X's must be visible.
If not, grip camera, press Shutter Button, and
turn Thumbwheel until film is fully rewound.
Insert Tool
Insert special tool into end slot (as shown).
CAUTION: This camera body
contains a high voltage capacitor
and circuit board. To avoid electric
shock, do not pry apart the front and
back sections of camera. Remove
only film and battery from their
respective compartments. If sections
of the camera are separated, do not
touch the circuit board.
Opening Instructions for the
KODAK MAX HQ Flash One-Time-Use Camera
Wear eye protection when opening all cameras.
Shutter Button
Thumbwheel
Open Film Door
Use tool to bend cover back and remove film.
Remove Film
Opened camera with film removed.
Place used camera in recycle bin.
5
Return camera to Kodak for recycling.
CAUTION: To avoid injury, use tool carefully.
Exposed Film
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Kodak MAX HQ - One Time Use Camera
Summary of Contents for Kodak MAX HQ - One Time Use Camera
- Page 1 CIS-209 July 2000 CURRENT INFORMATION SUMMARY Opening Instructions for the KODAK MAX HQ Flash One-Time-Use Camera Wear eye protection when opening all cameras. Wind Off Open Film Door Shutter Button Thumbwheel Check the frame counter window. Use tool to bend cover back and remove film.
- Page 2 Current Information Summaries provide information of limited or specific application. Responsibility for judging the timeliness and applicability of the information to a specific photographic use rests with the end user. Consumer Imaging EASTMAN KODAK COMPANY • ROCHESTER, NY 14650 CIS-209 Opening Instructions for the New 7-00 KODAK MAX HQ Flash One-Time-Use Camera Kodak and Max are trademarks.
Need help?
Do you have a question about the MAX HQ - One Time Use Camera and is the answer not in the manual?
Questions and answers