Chapter Five: Fingerprint Registration/Enrollment
When the TQ100 terminal and AttendanceRx software installation is complete,
fingerprints will first be enrolled and then validated.
For a network installation with multiple terminals a user's enrollment is only
needed on one terminal. Any timeQplus administrator can enable the enrolled
user to use any terminal in the network.
5.1 Enrollment Method
Correct enrollment method:
One or multiple fingerprints can be enrolled for every employee.
It is recommended to use the index finger and/or middle finger for enrollment.
Position your finger in the middle of the sensor. Apply light pressure.
Tips for improving the quality of fingerprint read:
Dirty or Dry Finger
How to choose your finger
Incorrect positioning
Fingerprint image changes
Fingerprint difficult to read
Other reasons
14
timeQplus BIOMETRIC™ Terminal User Manual
Clean your finger with a moisturized soap;
Wipe your finger with a pre- moisturized tissue
(alcohol-free wipes, preferably enriched to
hydrate the skin)
Use the index or middle finger to enroll; try left
hand fingers if the right hand (index or middle
finger) fingerprints are faded, worn or missing.
Place your finger in the middle on the sensor;
keep you finger flat on the sensor and apply
pressure trying to cover as much of the sensor
window as possible; DO NOT touch the sensor
in an angled or tilted position, DO NOT slide
your finger.
Re-enroll your finger if your fingerprint changes
as a result of an injury, etc.
Use one (1:1) identification method. Key in
your PIN number and place your finger on
the sensor.
Use password registration as backup for people
with hard to read fingerprints.