Ethernet Communication - Acroprint TQ100 Terminal User Manual

4.2.3 Network Connection using Ethernet communication
function with RJ45 interface
A) In Communication Setting, press Scroll-down to set RS485
communication to "No" and set Ethernet to "Yes", displayed as follows:
Communication
Default gateway
RS485
Ethernet
B) Set the IP address, subnet mask and default gateway to those of
the LAN. The IP address must be unique. The same password must
be used both in the terminal setup and PC software.
C) Turn the terminal off.
D) Connect the network cable of the LAN to the RJ45 interface
of the terminal.
E) Turn on the terminal.
timeQplus BIOMETRIC™ Terminal User Manual
Note: A 6 ft Ethernet cable
is included in the standard
package.
No
Yes
13