Table of Contents
Advertisement
4.2.1 Direct Connection using RS232 with
RS232 communications
A) In Communication Setting, press Scroll-down button. The default
display is as follows:
Communication Settings
Device ID
Baud Ratio
Port No
B) Turn off the TQ100 terminal.
C) Turn off your PC.
D) Using the thirty foot (9 m) RS232 serial cable included in your package
connect one end to your PC communication serial port and the other end to
TQ100 terminal.
E) Power on the PC, then the terminal.
timeQplus BIOMETRIC™ Terminal User Manual
Note: RS232 is used to directly
connect one terminal per
computer. In this case, default
1
setting is recommended. For
38400
network configurations using
80
multiple terminals, the device ID
number must not be repeated and
must be set to different numbers.
11
Advertisement
Table of Contents
