Security - Asus P7H55/USB3 User Manual

Atx motherboard
Table of Contents

Advertisement

Full Screen Logo [Enabled]
[Disabled]
Disables the full screen logo display feature.
[Enabled]
Enables the full screen logo display feature.
Set this item to [Enabled] to use the ASUS MyLogo 2™ feature.
AddOn ROM Display Mode [Force BIOS]
[Force BIOS]
The third-party ROM messages will be forced to display during the boot
sequence.
[Keep Current]
The third-party ROM messages will be displayed only if the third-party
manufacturer had set the add-on device to do so.
Bootup Num-Lock [On]
[Off]
Sets the power-on state of the NumLock to [Off].
[On]
Sets the power-on state of the NumLock to [On].
Wait For 'F1' If Error [Enabled]
[Disabled]
Disables this function.
[Enabled]
The system waits for the <F1> key to be pressed when error occurs.
Hit 'DEL' Message Display [Enabled]
[Disabled]
Disables this function.
[Enabled]
The system displays the message "Press DEL to run Setup" during POST.
2.7.3

Security

The Security menu items allow you to change the system security settings. Select an item
then press <Enter> to display the configuration options.
Change Supervisor Password
Select this item to set or change the supervisor password. The Supervisor Password item
on top of the screen shows the default Not Installed. After you set a password, this item
shows Installed.
To set a Supervisor Password:
1.
Select the Change Supervisor Password item and press <Enter>.
2.
From the password box, type a password composed of at least six letters and/or
numbers, then press <Enter>.
3.
Confirm the password when prompted.
The message Password Installed appears after you successfully set your password.
To change the supervisor password, follow the same steps as in setting a user password.
To clear the supervisor password, select the Change Supervisor Password then press
<Enter>. The message Password Uninstalled appears.
If you forget your BIOS password, you can clear it by erasing the CMOS Real Time Clock
(RTC) RAM. See section 1.6 Jumper for information on how to erase the RTC RAM.
ASUS P7H55/USB3
2-23

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

P7h55-m dvi

Table of Contents