Table of Contents
Advertisement
III. INSTALLATION
DRAM Installation Procedures:
1. The SIMM will only fit in one orientation as shown because of a "Plastic Safety
Tab" on one end of the SIMM sockets which matches the "Notched End" of
the memory modules.
2. Press the memory module firmly into place starting from a 45 degree angle
making sure that all the contacts are aligned with the socket.
3. With your finger tips, rock the memory module into a vertical position so that
it clicks into place.
72 Pin DRAM in SIMM Socket
Metal Clip
Plastic Safety Tab (This Side Only)
4. The plastic guides should go through the two "Mounting Holes" on the sides
and the "Metal Clips" should snap on the other side.
5. To release the memory module, squeeze both "Metal Clips" outwards and rock
the module out of the "Metal Clips".
1
Bank 0
72 Pin SIMM DRAM Sockets & Module
P/E-P55T2P4D User's Manual
2
3
4
5
6 7
8
Bank 1 Bank 2 Bank 3
Notched End
Mounting Hole
15
Advertisement
Table of Contents
