Audio - Arcam BDP300 Handbook

5
Display TV Aspect Ratio Auto

Audio

3 Resolution 4 1080p
Language TV System 1080i
Network HDMI Color Space 720p
System HDMI Deep Color 576p
Security HDMI 1080p 24Hz 576i
6
Use cursor keys to highlight menu and
Exit
RTN SETUP
OK key to select
Resolution – Set the video resolution of the
HDMI
outputs.
COMPONENT VIDEO
Auto: Sets the TV's preferred resolution.
<
1080p: Full HD progressive video.
<
1080i: interlaced HD video.
<
720p: progressive HD video.
<
480p/576p: 480 lines (NTSC) or 576 lines (PAL)
<
progressive video
480i/576i: 480 lines (NTSC) or 576 lines (PAL)
<
Standard Definition interlaced video.
NOTE
The HDMI Auto setting may not set the best possible
resolution. If you have a 1080p Full HD display, set
the resolution to 1080p.
5
Display TV Aspect Ratio NTSC
Audio Resolution PAL
3 4
Language TV System
Network HDMI Color Space
System HDMI Deep Color
Security HDMI 1080p 24Hz
6
Use cursor keys to highlight menu and
Exit
RTN SETUP
OK key to select
TV System – Set the video signal format. If the colour
or picture quality of analogue video appears incorrect,
change this setting. It should not need to be adjusted in
normal use. You can select NTSC (the USA and Canada
video standard), or PAL (the Europe, Australia and
China video standard).
5
Display TV Aspect Ratio Auto
Audio Resolution YCbCr
Language TV System YCbCr422
Network 3 HDMI Color Space 4 Full RGB
System HDMI Deep Color RGB
Security HDMI 1080p 24Hz
6
Use cursor keys to highlight menu and
Exit
RTN SETUP
OK key to select
HDMI Color Space – 'Color Space' refers to the number
of individual colors that can be displayed on the screen.
If you know the color space capability for the connected
TV, you can match it by selecting one of these options.
We recommend you select ' A uto' .
HDMI Deep Color – sets the level of Deep Color
processing applied to the HDMI video output. You can
select ' A uto' or 'Off ' . If this option is set to Auto and
your TV supports Deep Color, the screen displays colors
at 30-, 36- or 48-bit accuracy (compared to the 24-bit
and
accuracy of standard color). Check the documentation
that came with your TV to see if your TV supports Deep
Color. All system HDMI interconnect cables must be
Deep Color compatible in order to use 30/36-bit Deep
Color signals.
NOTE
If you experience a flickering or abnormal picture
after changing the Deep Color setting, connect the
unit using a Composite video cable and change the
setting to a value supported by the display.
HDMI 1080p 24Hz – You can select ' A uto' or 'Off ' .
Movies are recorded on film at a rate of 24 pictures
(frames) per second. Many of the movies on Blu-ray
Discs are placed on the discs at this frame rate. If your
TV supports 24 frames per second, but you would prefer
to view the video at a higher frame rate, you should turn
off HDMI 1080p 24Hz.
NOTE
1080/24p video signals can only be output
<
using the connection.
HDMI
The connected equipment (AV receiver, TV/
<
projector) must be 1080/24p compatible.
The output resolution must be set to 1080p or
<
HDMI Auto.
HDMI 3D – To turn the 3D feature (if available) on or
off. You can select ' A uto' or 'Off ' .
Audio
Display Digital Out PCM
4
Audio HDMI Out PCM
Language Down Sampling 48kHz
Network Dynamic Range Off
System
Security
Use cursor keys to highlight menu and
RTN SETUP
OK key to select
Display 3 Digital Out 4 PCM
Audio HDMI Out Bitstream
Language Down Sampling Bitstream Re-e...
Network Dynamic Range
System
Security
Use cursor keys to highlight menu and
RTN SETUP
OK key to select
Digital Out – Sets the audio format output from the
or connections
OPTICAL COAXIAL DIGITAL OUT
You can select:
PCM – Outputs the signal as processed audio
<
ready for any receiver. Use this when your receiver
cannot decode the movie soundtrack on the disc.
Bitstream – Outputs the movie soundtrack
<
without any processing. This option requires
a receiver that supports the movie soundtrack
format.
Bitstream Re-encode – Combines all audio
<
signals and outputs as DTS, Dolby, or PCM
depending on the audio stream on the disc.
NOTE
The signal at the output is also determined by
HDMI
the formats supported by the connected equipment.
HDMI Out – Sets the audio format output from the
connection
.
You can select:
PCM – (as above).
<
Bitstream – (as above).
<
Bitstream Re-encode –Automatically selects the
<
HDMI digital signal type according to the audio
stream on the disc.
E-20
Down Sampling – Set the maximum sample rate of
audio output from the or
OPTICAL
48kHz – (most compatible) Select this option if
<
the TV speakers, amplifier, or home theater is not
capable of handling signals over 48kHz sampling
rate. If you do not have an audio receiver or TV
connected to your player through one of the
digital audio jacks (optical or coaxial), select
48kHz. See the documentation that came with the
receiver or TV.
Exit
96kHz – Select this option if the TV speakers,
<
amplifier, or home theater is capable of handling a
digital sampling rate of 96kHz
192kHz – (best quality) Select this option if the
<
TV speakers, amplifier, or home theater is capable
of handling a digital sampling rate of 192kHz.
NOTE
If the connected equipment (e.g. AV receiver) does
Exit
not support 96kHz or 192kHz audio, silence or loud
noise may result from this setting. If this happens, set
Down Sampling to 48kHz.
.
Dynamic Range – Selects the Dynamic Range Control
mode to 'Off ' or 'On' .
Dynamic Range is the range between the loudest sounds
and the quietest ones. If set to 'On' you can listen to a
movie at a lower volume without losing sound clarity.
Off – No dynamic range compression
<
On – Dynamic range compression.
<
HDMI
COAXIAL DIGITAL OUT.