Toshiba WR01A - PoE Vandal Resistant Network Dome Camera User Manual page 73

Click "Firmware update."
• The Firmware update screen appears on the right side of the display.
Click the "Browse" button.
• A screen appears, allowing you to select a file.
Select the file of the latest firmware you downloaded in
the above "Before Starting" section.
• The name of selected file appears on the screen shown in Step 3.
Click "Upload" button on the screen shown in Step 3.
• Follow the instructions on the screen to update the firmware.
• Restart the camera after the firmware is completely updated.
Important
Please ensure that your camera has the latest firmware update.
G
All the operations stop in the camera while the firmware is updated.
G
Never turn off the camera while the firmware is updated. It causes a failure of updating
G
operation.
Never disconnect a LAN cable from the camera while the firmware is being updated.
G
Doing so may cause a malfunction.
Downloaded from www.Manualslib.com manuals search engine
73