Setting The Ess Id - Yamaha MCX 1000 - MusicCAST - Digital Audio Server Owner's Manual

Connecting to the network
I Setting the ESS ID
All wireless networks work by using weak high
frequency radio signals to transmit data between the
various components using the same "channel" on
the network. Each "channel" has an identification
code, called an ESS ID. Only items with the same
ESS ID transmit data to each other.
If you do not wish to use a wireless connection,
skip this section and move to the section on setting
the IP address.
1.
If you wish to use a wireless connection,
from the Manual Setup menu, use the u
/ d to move the cursor to ESS ID and
press SELECT.
The ESS ID screen appears on the display.
SELECT
2.
Press SELECT.
The cursor enters the ESS ID setting field.
You need to enter the same ESS ID you have set
on the MusicCAST server.
3.
Use u / d to select the desired
character, then press j / i to move the
cursor to the left or right.
4.
When you finish entering the ID, press
SELECT to confirm the setting.
The cursor returns to the left of the "ESS ID"
parameter.
102_Musiccast_E.p65 30
5.
If you are satisfied with the settings you
have made, move the cursor to "Save &
Network restart" and press SELECT.
This confirms the settings and restarts the
network hardware on the MusicCAST client.
Alternatively, select "Cancel" to exit from the
menu without saving and confirmation.
SELECT
SELECT
30
2003.06.04, 16:08