Using The On Timer Function; Setting The Timer - Yamaha MCX 1000 - MusicCAST - Digital Audio Server Owner's Manual

Using the ON Timer function

The MusicCAST client has a timer function that
enables it to automatically switch on and begin
playback at a time you specify, rather like an alarm
clock. This is called the ON Timer function. You
can use the ON timer and OFF Timer
simultaneously.
ON
TIMER
PUSH
SELECT
MENU
PLAY INFO.
– +
VOL
PHONES
I Setting the timer
Carry out the following procedure to set the
MusicCAST client to power up at a specified time:
1.
Press and hold MENU for two seconds
to return to the Top Menu screen.
MENU
2.
Use u / d to move the cursor to "Setup"
and press SELECT.
The Setup screen appears on the display.
SELECT
3.
Use u / d to move the cursor to "ON
Timer" and press SELECT.
The ON Timer screen appears on the display.
SELECT
104_Musiccast_E.p65
OFF TIMER SLEEP
ON TIMER
ON TIMER REPEAT RANDOM
I 2 3
PAUSE
4 5 6
STOP
7
PLAY
MENU
S
PLAY
MENU
INFO.
GROUP GROUP
SELECT
u / j / d / i
BOOK INPUT
MARK
SELECT RECALL VOL MUTE
57
4.
Press SELECT.
The cursor enters the ON Timer setting field.
SELECT
5.
Use u / d to set the ON Timer setting to
ON and press i.
SELECT
6.
Enter the time you wish the MusicCAST
client to switch on by pressing u / d to
cycle through the displayed characters,
and pressing j / i to move the cursor
left and right.
7.
Press SELECT to confirm the setting.
8.
If you are satisfied with the settings you
have made, move the cursor to "Save"
and press SELECT.
The confirmation screen appears.
SELECT
Alternatively, select "Cancel" to exit from this
screen without saving and confirmation.
9.
The display returns to the Setup screen
after a small delay, and the TIMER
indicator lights.
57
2003.06.04, 16:09
MusicCAST settings