Table of Contents
Advertisement
Downloaded from
www.Manualslib.com
12
13
manuals search engine
STEP 2: Configuring for Cable
The TV Guide On Screen system needs to locate the correct code for yourcable box
brand in order to work properly.
ENTER
Is your cable box now tuned to channel 09?
Yes
No
Test the code again
Press
/
to select, then press ENTER.
If your answer is "Yes", and:
• if you selected "TUNER" at step 6,
you will go to step 13.
• if you selected "Line 1" at step 6,
you will go to step 12.
Antenna connection
STEP 3: Configuring for Antenna
To supply your DVD Recorder with correct program listings, the TV Guide On Screen
system needs to know if you have attached an antenna to your DVD Recorder to
receive over-the-air stations.
ENTER
Do you have an antenna connected to your DVD Recorder?
Yes
No
Press
/
to select, then press ENTER.
Confirmation
STEP 4: Confirming Your Settings
You have entered the following TV Guide On Screen system settings. If any setting
is marked INCOMPLETE, you will not be able to use the feature until you complete
that portion of TV Guide On Screen system setup.
ZIP code - 46001 (USA)
Cable Box on input "TUNER" Ch. 3
Cable Box selected: code 036 (Toshiba)
ENTER
Are the above settings correct?
Yes, end setup
No, repeat setup process
Press
/
to select, then press ENTER.
(Continued)
37
Advertisement
Table of Contents
