Table of Contents
Advertisement
Connections
Connecting to a TV equipped with component video inputs
If your TV has component video inputs, you can obtain pictures in better quality.
To P
VIDEO OUT
B
To Y VIDEO OUT
Component video outputs/inputs
Some TVs or monitors are equipped with component
video inputs. Connecting to these inputs allows you to
enjoy higher quality picture playback.
Actual labels for component video inputs may vary
depending on the TV manufacturer. (ex.Y, R-Y, R-B or
Y, C
, C
)
B
R
In some TVs or monitors, the color levels of the
playback picture may be reduced slightly or the tint
may change. In such a case, adjust the TV or monitor
for optimum performance.
• Make the following setting.
On-screen display
"Audio out select"
Notes
• Refer to the owner's manual for the TV to be connected to this recorder for more information concerning an audio system.
• If you place the recorder near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the recorder
away from the tuner and radio.
• The output sound of the recorder has a wide dynamic range. Be sure to adjust the audio amplifier's volume to a moderate
listening level. Otherwise, the speakers and your hearing may be damaged by sudden high volume sound.
• Turn off the amplifier before you connect or disconnect the recorder's power cord. If you leave the amplifier power on, the
speakers may be damaged.
• Consumers should note that not all high definition television sets are fully compatible with this product and may cause
artifacts to be displayed in the picture. In case of 525 progressive scan picture problems, it is recommended that the user
switch the connection to the "Standard Definition" output. If there are questions regarding our TV set compatibility with this
model 525p DVD player, please contact our Customer Service Center.
26
Downloaded from
www.Manualslib.com
To P
VIDEO OUT
R
Only video signals are output
from the COMPONENT OUTPUT
jacks.
(Audio signals are not output.)
To obtain the sound, connect an
audio system to the audio output
terminals.
Select
"Analog 2ch"
manuals search engine
TV or monitor equipped with
component video (INTERLACED/
PROGRESSIVE) inputs
To switch the output signal (Progressive/Interlaced)
Press PROGRESSIVE button to change the
PROGRESSIVE
video output signals (progressive and
interlace) from COMPONENT OUTPUT jacks.
Page
page 39
Video cable
(not supplied)
To P
video input
R
To P
video input
B
To Y video input
Advertisement
Table of Contents
