1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. DVR
  5. RD-XS35SU
  6. Quick reference

Toshiba RD-XS35SU Quick Reference

Hdd/dvd video recorder
Hide thumbs Also See for RD-XS35SU:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Service Manual, Owner's Manual
This booklet is to help you start up your recorder and experience a basic operation.
To learn about the recorder and obtain its full performance, refer to the Owner's Manual.
(
xx
is reference page in the INSTALLATION GUIDE, and
I
IMPORTANT: Before starting your hook-up and installation of your DVD recorder,
please review the safety instructions on
Notes on HDD
This unit contains a hard disc drive (HDD). A HDD is subject to shock, shakes, and environmental changes such as
temperature, which can damage data stored on the disc. Observe the following instructions.
Do not shock or shake the unit (especially during operation).
Do not use the unit on a shaky or unstable surface.
Do not place the unit on a location where it is not horizontal.
Do not cover the ventilation holes for the cooling fan.
Do not use in a location where the temperature rises or changes rapidly.
Do not disconnect the power plug from a wall outlet while the unit is turned on.
Do not disconnect the power plug from a wall outlet or break power supply to the unit. Before disconnecting the power plug,
be sure to press the power button and make sure the unit ends the finishing process and the power turns off completely. If the
power plug is disconnected or power supply is disrupted while the unit is recording, all recorded content will be erased.
Toshiba is not liable for any damage or loss of recorded data caused by shock, shakes, misoperation or malfunction.
Exemptions
Toshiba is not liable for any damage caused by fires, natural disaster (such as thunder, earthquake, etc.), acts by third
parties, accidents, owner's intentional or unintentional misuse, or uses in other improper conditions.
Toshiba is not liable for incidental damages (such as profit loss or interruption in business, modification or erasure of recorded
data, etc.) caused by use or inability to use of this product.
Toshiba is not liable for any damage caused by neglect of the instructions described in the owner's manual.
Toshiba is not liable for any damage caused by misuse or malfunction through simultaneous use of this product and the
connected equipment or software that Toshiba is not concerned.
Toshiba does not compensate for contents which was not recorded/edited because of some malfunctions of this product or
discs during operation, and is not liable for incidental damages (such as profit loss or interruption in business, etc.) produced
by such conditions.
P000453970
PM0025869010
H
RDXS35SUqE
HDD/DVD VIDEO RECORDER
RD-XS35SU
RD-XS35SC
Quick Reference
1
xx
in the OPERATIONS GUIDE.)
O
I
-
I
in the "INSTALLATION GUIDE".
2
9
06.2.13, 5:41 PM

Advertisement

Table of Contents
loading

Related Manuals for Toshiba RD-XS35SU

Summary of Contents for Toshiba RD-XS35SU

  • Page 1 Toshiba is not liable for any damage or loss of recorded data caused by shock, shakes, misoperation or malfunction. Exemptions Toshiba is not liable for any damage caused by fires, natural disaster (such as thunder, earthquake, etc.), acts by third parties, accidents, owner’s intentional or unintentional misuse, or uses in other improper conditions.
  • Page 2 Make sure the following accessories are supplied. Connections Supplied accessories Remote control ............. 1 Connect your cable box to the RF IN Batteries (AAA) ............. 2 Coaxial cable ..............1 (FROM ANT.) terminal or the INPUT1 or Video/audio cable ............1 INPUT3 jacks on the recorder.
  • Page 3 Refer to the owner’s manual of each connected equipment as well. Select one of these connections. Set top box Cable box Antenna cable Place close to the signal sensor (not supplied) of the set top box. COMPONENT OUTPUT G-LINK ® cable (See (supplied)

  • Page 4: On/Standby Indicator

    Settings Start Preparation Turn on the equipment (TV, VCR, etc.) connected to the recorder. Select the corresponding video input on your TV. Press ON/STANDBY on the front panel or on the remote control. When the power turns on, ON/STANDBY indicator changes color from red (standby mode) to green (operation).
  • Page 5 Cable service TV Guide On Screen ® Setup STEP 2: Configuring for Cable Setup selection To supply your DVD Recorder with correct program listings, the TV Guide On Screen system needs to know if your DVD Recorder receives its signal from a cable service.

  • Page 6: Antenna Connection

    What is your DVD Recorder tuned to when using the cable box? any remote control. Ch 2 Now testing code 036 (Toshiba)... Ch 3 Ch 4 Using your DVD Recorder remote, move up or down to highlight your answer. Press Press Enter to continue.
  • Page 7 ® system is not available or has any Cable Box on input “TUNER” Ch. 3 Cable Box selected: code 036 (Toshiba) troubles in your area, try another method to control channels. See “C: Satellite set top box setting” Are the above settings correct?

  • Page 8: Loading A Disc

    Whenever you operate the recorder: 1 Turn on the equipment (TV, VCR, etc.) connected to the recorder. 2 Select the corresponding video input on your TV. 3 Press ON/STANDBY to turn the recorder on. Notes on Loading While the icon is flashing: •...
  • Page 9 Selecting a channel Press INPUT SELECT to select the input to which the cable box is connected (2ch/3ch/4ch/Line1, page 5, 6). Press CH/Page or the number buttons. If you did not connect a cable box: Press CH/Page or the number buttons. Recording a current program Press HDD or DVD to select a media to record on.

  • Page 10: Playing Recorded Contents

    Recording from a connected VCR Press INPUT SELECT repeatedly so that “L-1,” “L-2,” or “L-3” appears on the front panel display, corresponding to the input in which the device is connected. Each time you press the button, the indicator changes. L-1: To record pictures from equipment connected to the INPUT1 jacks on the rear panel.
  • Page 11 Press to select “Copy”, “Move” or Erasing content “Same Disc”. On CONTENT MENU, select an To copy from the HDD to a loaded disc, select “Copy”. unnecessary title (chapter). For details, see Press QUICK MENU. Press ENTER. A Quick Menu appears. Copying starts.

  • Page 12: Using The Tv Guide On Screen

    ® Using the TV Guide On Screen services As you have done TV Guide On Screen ® setup, you can do the following services of TV Guide. • LISTINGS: Check out up to 8 days on on-screen listings • RECORDINGS: Keep track of everything you record •...
  • Page 13 Notes LISTINGS • On a Panel Menu, an option may have arrows on both sides. Whenever you enter the TV Guide mode, you will first see this Press to cycle the selection. service. • On a Panel Menu, pressing Menu cancels any changes and Pressing Info opens a Help screen.
  • Page 14 Program recording with TV Guide on screen ® Press TV Guide. e.g. CONTENT Title List 1 / 2 Page MENU News 3:19 RECORDINGS LISTINGS SEARCH INFO Press Menu now for Listings Options Move to highlight any show Press Enter to tune to current show in glid Press Menu for more current show options Welcome TODAY...
  • Page 15 Getting more information on a TV program Setting program recording manually Press TV Guide. Press TV Guide. e.g. CONTENT Title List 1 / 2 Page MENU News 8:03 RECORDINGS LISTINGS SEARCH INFO Press to select “SCHEDULE” and Press Menu now for Listings Options Move to highlight any show Press Enter to tune to current show in glid Press Menu for more current show options...
  • Page 16 Using EASY NAVI Open “EASY NAVI Main Menu”, a main gate to the functions of this recorder. From this menu, you can access the desired functions. Press EASY NAVI. Sound is muted and the following GUI appears. (Actual displays vary depending on operational status.) Appears when the finder shows the current broadcast.

This manual is also suitable for:

Rd-xs35sc

Table of Contents