Antenna Cable Connection - Toshiba D-R560KU Owner's Manual

ANTENNA CABLE CONNECTION

This section describes how to connect your unit to an antenna, cable box, etc.
1
Disconnect the power cord of your TV from the AC outlet.
2
Disconnect RF coaxial cable from antenna input jack of your TV.
VHF / UHF
antenna
cable TV
company
3
Connect cables to the unit.
Make the basic connection as illustrated below.
VHF / UHF
antenna
or
cable TV
company
4
Plug in the power cord of this unit and your TV to the AC outlet.
rear of your TV
HDMI OUT
L
O OUTPUT
TREAM
rear of this unit
Note
• For your safety and to avoid damage to the device, please unplug the RF coaxial cable from the ANTENNA IN jack
before moving the unit.
• If you use an antenna to receive analog TV, it should also work for DTV reception. Outdoor or attic antennas will be
more effective than set-top versions.
• RF output is for tuner pass through only. DVD playback through the RF is not possible.
18 18 EN EN
E7M70UD_D-R560KU_EN.indd 18 E7M70UD_D-R560KU_EN.indd 18
2
disconnect
or
RF coaxial cable ANT. IN
IN
ANTENNA
RF coaxial cable
OUT
ANTENNA
RF coaxial cable
ANT. IN
connect
rear of your TV
1 1 1
disconnect
IN
VIDEO VIDEO
IN OUT
Y
L L
P /C
B B
R R
IN
OUT P R /C R
AUDIO IN COMPONENT DIGITAL AUDIO OUTPUT
S-VIDEO AUDIO OUT
(L1) VIDEO OUT PCM / BITSTREAM
VIDEO
OUT
rear of your TV
RCA audio
cable
Supplied cables used in this connection are as follows:
• RF coaxial cable x 1
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your
local store.
* Once connections are completed, turn on the TV and
initial setting begins.
Channel scanning is necessary for the unit to memorize
all available channels in your area.
(Refer to "INITIAL SETTING" on page 25.)
rear of this unit
L
RCA video
cable
R
AUDIO OUT
L R
AUDIO IN VIDEO IN
2007/12/17 11:11:34 2007/12/17 11:11:34