Panasonic AG-HMR10 Operating Instructions Manual page 96

Troubleshooting (continued)
PC connection
Computer does not
recognize the recorder
when USB connection cable
is connected.
An error message appears
on the computer when the
USB connection cable is
disconnected.
SD Memory Card
The recorded images on an
SD Memory Card appear
strange.
The SD Memory Card
cannot be used even after
formatting.
The recorder does not
recognize the SD Memory
Card even though it is
inserted correctly.
The SD Memory Card is not
recognized when inserted
into other devices.
96
•
Check the operating environment.
•
Is the recorder's operating mode setting correct? The recorder will
not be recognized when in REC mode or PB mode. Please set the
recorder to PC mode.
•
If your computer has multiple USB terminals, please try connecting
the recorder to a different USB terminal.
•
Switch the recorder's power off and back on again, and reconnect
the USB connection cable.
•
Always follow instructions on how to remove hardware safely as
appropriate for your computer when disconnecting the USB cable.
•
The data on the card could be corrupted. Data can be corrupted by
static electricity and electromagnetic waves. Please always save
important data to a computer or other storage media.
•
There could be a fault with the recorder or with the SD Memory
Card. Please consult the dealer. Always use only SD Memory
Cards of 512 MB - 32 GB with this recorder.
•
Was the inserted SD Memory Card originally formatted with a
computer? Always use this recorder to format SD Memory Cards.
Please be aware that, when an SD Memory Card is formatted, all
data recorded on the card will be erased and will not be restorable.
•
Please check that the device is compatible with the capacity or type
(SD Memory Card/SDHC Memory Card) of the SD Memory Card
that you are using.
For details, please consult the device's own operating instructions.
P71
—
—
—
P34
P16