Display Setup - Panasonic AG-HMR10 Operating Instructions Manual

Setup menu list (continued)

DISPLAY SETUP

Item
ZEBRA CAM
SAFETY ZONE CAM
FOCUS BAR CAM
REC COUNTER SDI/CAM
OUTPUT OSD SDI/CAM
PB
DATE/TIME SDI/CAM
PB
LEVEL METER SDI/CAM
PB
ZOOM & CAM
FOCUS
CARD & SDI/CAM
BATTERY PB
OTHER SDI/CAM
DISPLAY PB
LCD SDI/CAM
BACKLIGHT PB
LCD DTL SDI/CAM
LCD SET SDI/CAM
PB
88
Display
mode
Sets the level of the zebra pattern that is displayed on the LCD monitor screen.
OFF, 105%, 100%, 95%, 90%, 85%, 80%, 75%, 70%, 65%, 60%, 55%, 50%
Sets the display method for the safety zone. (Page 75)
90%, 4:3, OFF
Sets whether to display the focus assist bar.
ON OFF
Select [ON] to display the focus assist bar.
Selects the counter operation during recording.
TOTAL: Continues counting until the counter is reset.
CLIP: Resets the counter at the start of recording to count the recording time
for each clip.
•
In PB mode, operation is always in CLIP mode.
ON OFF
Select [ON] to output the information displayed on the LCD monitor screen
together with the video as a video output signal.
Selects the date and time to display on the LCD monitor or overlay and output on
the video.
TIME: Displays/outputs the time.
DATE: Displays/outputs the date.
TIME & DATE: Displays/outputs the date and time.
OFF: Does not display/output the date and time.
Sets whether to display the audio level meter.
ON OFF
Sets whether to display the zoom value and focus value.
ON OFF
Sets whether to display the remaining SD Memory Card capacity and the
remaining battery capacity.
ON OFF
Sets the amount of information to display on the LCD monitor screen. (Page 78)
ON OFF
Adjusts the backlight of the LCD monitor. Set to [HIGH] for a brighter backlight.
LOW NORMAL HIGH
Emphasizes the edges of the video displayed on the LCD monitor screen.
ON OFF
Adjusts the LCD monitor. (Page 32)
LCD COLOR LEVEL: Adjusts the color density of the screen.
LCD BRIGHTNESS: Adjusts the brightness of the screen.
LCD CONTRAST:
Description of settings
Adjusts the contrast of the screen.
indicates the factory default setting.