Av Out Setup - Panasonic AG-HMR10 Operating Instructions Manual

AV OUT SETUP

Display
Item
mode
SDI OUT SDI/CAM
PB
HDMI OUT SEL SDI/CAM
PB
SDI EDH SDI/CAM
PB
SDI EE SEL SDI
DOWNCON SDI/CAM
MODE PB
HP MODE CAM
Selects the output video format of the SDI OUT terminal.
ON: Outputs in the recording format.
DOWNCON: Outputs in the down-converted format.
OFF: Does not output video from the SDI OUT terminal. (HDMI output
mode)
Sets the output video format of the HDMI OUT terminal.
AUTO: Automatically determines the output resolution based on information
from the connected television or monitor.
FIX: Fixes the output at the recorded resolution.
(Output in 1080 interlaced or 720 progressive mode)
480P (When [SYSTEM FREQ] is set to [59.9Hz]):
Outputs in 480 progressive mode.
576P (When [SYSTEM FREQ] is set to [50Hz]):
Outputs in 576 progressive mode.
Selects whether to superimpose EDH (Error Detection Handling) during SD-SDI
output.
ON: Superimposes EDH.
OFF: Does not superimpose EDH.
Switches the output from the SDI OUT terminal.
NORMAL: Outputs data in the recording format. This setting is suitable for
monitor output, such as OSD display.
THROUGH: Outputs the input data unchanged. Device information, such as
OSD display, will not be output.
Switches the down-conversion output mode during SDI output.
SIDE CROP: Crops the right and left edges of the image for a 4:3 aspect ratio.
LETTER BOX: Adds black bands at the top and bottom of the image to
display 16:9 images on a 4:3 screen.
SQUEEZE: Squeezes 16:9 images horizontally to display them on a 4:3
screen.
Switches the headphone output.
LIVE: Outputs the audio that is input from the microphone unchanged.
Select this setting if there are unacceptable delays in the sound.
RECORDING: Outputs the audio in the condition in which it is recorded (the audio
is synchronized with the video).
Description of settings
indicates the factory default setting.
87