Panasonic AG-HMR10 Operating Instructions Manual page 60

Thumbnail screen (continued)
1 Thumbnail display status (Page 63)
The types of clips displayed as thumbnails
appear in this area.
2 Repeat playback indicator (Page 61)
Displayed during repeat playback.
3 Card status display
Displays the SD Memory Card status.
4 Battery remaining display (Page 24)
Displays the remaining battery capacity.
5 Cursor (yellow frame)
Displayed on the currently selected thumbnail.
6 Recording mode display
Displays the recording mode if the clip currently
selected by the cursor was recorded in PH
mode.
7 Recording format display
Displays the recording format of the clip
currently selected by the cursor.
8 Duration display
Displays the recording time of the clip currently
selected by the cursor.
9 Time display (Page 63)
In accordance with the [DATA DISPLAY] setting
in the [THUMBNAIL SETUP] setup menu,
displays one of the following: time code at start
of clip recording/user information at start of clip
recording/time of recording/date of recording/
date and time of recording.
10 Clip number
Displayed in order of recording (up to 1000
clips). The numbers of clips that cannot be
played back (such as clips of different recording
formats) are displayed in red.
To play clips displayed in red, set [PB FORMAT]
in the [PLAY SETUP] setup menu to the same
format as the recording format. (Page 61)
11 : Clip protect display
Displayed on protected clips.
(Page 65)
12 Indicators
M
: Shot mark
Displayed when shot marks have been added.
(Page 42)
I
: Index
Displayed when indexes have been added.
(Pages 42, 64)
: Resume playback display
Displayed on clips for which resume playback
is set. (Page 62)
60