Resume Playback (Resume Play); Setting The Skip Method (Skip Mode) - Panasonic AG-HMR10 Operating Instructions Manual

Playback settings (PLAY SETUP) (continued)

Resume playback (RESUME PLAY)

Use this setting to play back from where the clip
was previously paused.
1
Press the [MENU] button.
Using the setup menus (Page 29)
2
Select [PLAY SETUP] → [RESUME PLAY] →
[ON].
3
Press the [MENU] button to return to the
thumbnail screen.
4
Select a clip for playback.
If playback has previously been paused,
is displayed on the clip thumbnail, and the
remainder of the clip will be played next time
the clip is selected for playback.
• To turn the resume playback setting off,
select [OFF] in step
• This setting will be canceled if the power
is turned off or if the portable recorder is
switched to CAM mode.
62
2
.
Setting the skip method
(SKIP MODE)
Use this setting to set the operation performed
when pressing or
1
Press the [MENU] button.
Using the setup menus (Page 29)
2
Select [PLAY SETUP] → [SKIP MODE].
3
Select the skip method.
CLIP:
If or is pressed while playback is
paused, the position moves to the start of the
previous or next clip.
CLIP & INDEX:
If or is pressed while playback is
paused, the position moves to the start of the
previous or next clip, or to the previous or
next index.
4
Press the [MENU] button to return to the
thumbnail screen.
while playback is paused.