Saving properties configurations to file
Note: If you choose to make the session delayed in the Set Ses-
sion Parameters dialog, clicking
to the Task View instead of beginning the session immediately.
Using ezRemote Manager it is also possible to save the appliance
property information as a file; to be used as a template for the ezUp-
date automatic update procedure (see the Appendices dealing with
the ezUpdate process); or for support and debugging purposes. Once
you have pulled the appliance properties from your appliance by
selecting an appliance and clicking the Get button, click the Save As
button. The Save As dialog will appear allowing you to specify the
directory and file name of the appliance property file that you would
like to save.
Using ezRemote Manager, it is possible to save the appliance prop-
erties information as a file. This saved file (by default, "Proper-
ties.rgy") may be used as follows:
Loaded into ezRemote Manager for configuring appliances at a
•
later date (See "Loading property settings from a file" on page
55.)
As a template for the automatic ezUpdate procedure (see the
•
Appendices dealing with the ezUpdate process), or
For support and debugging purposes.
•
Once you have uploaded the appliance properties information from
your appliance by selecting an appliance and clicking the
click the
button. The Save As dialog will appear allowing
Save As
Saving properties configurations to file
Properties Manager
will add the delayed session
OK
Get
button,
57