Xpe/Nte Software Cloning - Neoware c50 - Thin Client User Manual

XPe/NTe software cloning

Note: If the selected group of appliances contains more than one
type of software, you will be prompted to choose which software
to update. Once you have chosen the software to update, ezRe-
mote Manager will display a list of the appliances running that
software. and allow you to select the appropriate software update
package for those appliances from the Available Versions list.
Note: If no software update packages appear on the Available
Versions list, then you need to download and install one of
Neoware's software update packages. The update packages can
be accessed at
http://www.neoware.com/downloads/
4
After selecting the appropriate software update package, click
.
Update All
5
When the Confirm Session Start dialog appears, click the
button to set the session parameters (see " Setting Session
ties
Parameters" on page 69) ,
.
Cancel
Note: If you choose to delay the session in the Set Session
Parameters dialog, clicking the
session to the Task View and delay the session, rather than begin-
ning the session immediately.
ezRemote Manager clones the full Flash disk image of Neoware thin
client appliances based on Windows XPe and Windows NTe. You
can copy the cloned image to other same-OS appliances running on
your network, or store that image for backup. This image includes
the operating system software, its configuration, all installed soft-
ware applications (including custom software installations), and the
configuration of that software.
Note: When you use a cloned image to update other Neoware Win-
dows XPe/NTe appliances running on your network, the cloned
image will completely replace the contents of the appliances' Flash
disks. Only network settings and autologon settings are saved from
the earlier version of the software.
Updating Appliance Software
to begin the session immediately, or
OK
button will add the delayed
OK
XPe/NTe software cloning
.
Proper-
35