Choosing The Right Instruction Set; 1Instruction Set A - Neoware c50 - Thin Client User Manual

Choosing the right
instruction set

1Instruction Set A

Following this paragraph are three sets of instructions: A, B, and C.
Use the set(s) of instructions indicated according to your Neoware
CE environment:
If you have Windows CE
thin client appliances
running the following
Neoware software release
versions:
5.2, 5.3, 5.3.1, or 5.3.2
5.2, 5.3, 5.3.1, or 5.3.2 and
also units with 6.0, 6.0.1,
6.0.2, or 6.0.3
5.2, 5.3, 5.3.1, or 5.3.2 and
you have units with 6.0, 6.0.1,
or 6.0.2
6.0.3
1
Locate the software update directory for the software you wish
your 5.2, 5.3, 5.3.1, or 5.3.2 units to have installed. This is usu-
ally located in either a subdirectory under a "NeowareSoftware-
Updates" directory or else a subdirectory under your ezRemote
Manager installation. For example:
D:\NeowareSoftwareUpdates\WinCE\WinCE-v532-4-112002\3000
or
F:\Program Files\Neoware\WinCE\software\WinCE-v531-062102-3\3000
2
Copy the 3000 subdirectory into your "(ftproot)/Neoware" direc-
tory. In the 3000 directory, open the system.rev file with Notepad
and copy the contents.
3
In the "(ftproot)/Neoware" directory, create a config.txt file. The
first line of the file should have the format:
SYSTEM "X" LOAD_AND_RUN /REBOOT install.exe 3000
Complete the instruction set(s)
Instruction Set A (below),
only
Instruction Set A (below) and
Instruction Set C (page 89)
Instruction Set B (page 88)
and
Instruction Set C (page 89)
Instruction Set C (page 89),
only.
ezUpdate Server Configuration 87