Error Messages During Ezanywhere Session Initiation - Neoware c50 - Thin Client User Manual

ezAnywhere Shadowing
ezAnywhere
shadowing
manager toolbar
button
Error messages
during ezAnywhere
session initiation
66 Initiating an ezAnywhere shadowing session
from the Actions menu.
Depending upon the configuration settings on the appliance you are
trying to shadow, you may have to wait for an approval from the
remote device's user before you can shadow. Also, you may have to
wait for an approval time-out, which will occur if the user is not at
their appliance when you attempt to shadow it. If shadowing is
allowed, a window will appear containing the thin client appliance's
current desktop.
Note: It is possible to establish multiple shadowing sessions (simul-
taneously connecting to different thin client appliances), however
you must establish them one by one following the instructions
above.
The following messages may appear when you attempt to initiate an
ezAnywhere shadowing session:
Shadow session already running. Do you want to replace it
•
with a new one?
This message occurs if you attempt to connect to a thin client
appliance when a shadowing session is already in progress. Click
to replace the running session with a new one.
Yes
Shadow sessions have been disabled on this appliance!
•
This message occurs if the target thin client appliance has been
configured to disallow ezAnywhere shadowing sessions.