Saving Connection Configurations To File - Neoware c50 - Thin Client User Manual

Connection Manager

Saving connection configurations to file

46 Saving connection configurations to file
4
Click and select the file to copied from the previously saved
Get
connection configurations.
When ezRemote Manager finishes uploading the preconfigured
connections, and lists them in the Connection Manager window,
the Update All button will become active.
5
To Copy or Clone the preconfigured connections to all of the
appliances listed on the left-hand side, click
6
When the Confirm Session Start dialog appears, click
to set the session parameters (see " Setting Session Parameters" on
page 69) , to begin the session immediately, or
OK
Note: If you choose to make the session delayed in the Set Ses-
sion Parameters dialog, clicking the
delayed session to the Task View instead of beginning the session
immediately.
Using ezRemote Manager it is possible to save the appliance con-
nection information as a file. This saved file (by default, Connec-
tions.rgy) may be used as follows:
To load into ezRemote Manager for configuring appliances at a
•
later date. See "Loading connection configurations from a file"
on page 45.
As a template for the automatic ezUpdate procedure (see the
•
Appendices dealing with the ezUpdate process), or
For support and debugging purposes.
•
Once you have uploaded the connection information from your
appliance by selecting an appliance and clicking the
. The Save As dialog will appear, allowing you to specify the
Save As
.
Update All
Properties
.
Cancel
button will add the
OK
button, click
Get