Step 2. Set Up A "Standard" Xpe Configuration; Step 3. Save The "Standard" Image To The Ezupdate Server - Neoware c50 - Thin Client User Manual

Step 2. Set up a
"standard" XPe
configuration
Step 3. Save the
"standard" image
to the ezUpdate
server
After the package is installed, there will be a new folder named
•
\\10.10.80.10\c_drive\Inetpub\ftproot\neoware
Configure one of the XPe thin client appliances exactly as you
•
wish all others to be configured.
Open the ezUpdate control panel applet (as Administrator) and:
•
Deselect checkbox:
Select checkbox:
updates
Enter in FTP Server:
Change the Update Version to:
Click
Save
Click to exit
Cancel
Log out of the XPe thin client appliance.
•
Use ezRemote Manager to copy the "standard" XPe image from
•
the appliance configured in Step 2, above (see "XPe/NTe soft-
ware cloning" on page 35).
Get Server Path URL from DCHP tag ...
Enable automatic configuration and software
ftp://10.10.80.10
2
Simple XPe ezUpdate example 111