Table of Contents
Advertisement
AC Adapter
Item
Vendor & model name
Input Requirements
Maximum input current (A,
@100Vac, full load)
Nominal frequency (Hz)
Frequency variation range (Hz)
Nominal voltages (Vrms)
Inrush current
Efficiency
Output Ratings (CV mode)
DC output voltage
Noise + Ripple
Output current
Output Ratings (CC mode)
DC output voltage
Constant output
Dynamic Output Characteristics
Start-up time
Hold up time
Over Voltage Protection (OVP)
Short circuit protection
Electrostatic discharge (ESD)
Dielectric Withstand Voltage
Primary to secondary
Leakage current
Regulatory Requirements
Power Management
Power Saving Mode
Standby Mode
Waiting time specified by the System Standby value
or the operating system elapses without any system
activity.
Or
When the computer is about to enter Hibernation
mode (e.g. during a battery-low condition), but the
Hibernation file is invalid or not present.
Chapter 1
Lite-on 65W PA 1650-02 (WPFC) 3P
1.7A max@3.5A/100Vac and 240 Vac
50 / 60
47 - 63
100 - 240
The maximum inrush current will be less than 220A when the adapter is
connected to 100Vac(60Hz) and 240Vac(50Hz) respectively.
High efficiency 82% minimum, at 100~240Vac AC input, full load, warm-up
condition.
Offers constant voltage 19.0V output source with 65W max output power
capacity.
380mvp-pmax (20MHz bandwidth) for resistor load
0A (min.)
3.42A (max.)
18.05 ~ 19.95V
3.8A
5 sec. (@115 Vac and 230Vac full load)
5ms min. (@115 Vac input, full load)
29V
Output can be shorted without damage, and auto recovery
15kV (at air discharge)
8kV (at contact discharge)
2150Vdc 10mA for 1 second
60uA max (240Vac, 60Hz)
Internal filter meets;
1. FCC class B requirements.
2. VDE 243/1991 class B requirements.
3. CISPR 22 Class B requirements.
3. VCCI class II requirements.
The Sleep indicator lights up
Specification
Phenomenon
25
Advertisement
Table of Contents
