Table of Contents
Advertisement
Security
The Security screen contains parameters that help safeguard and protect your computer from unauthorized
use.
Info.
User Password is :
Supervisor Password is :
Set User Password
Set Supervisor Password
Primary HardDisk Security
Password on Boot
F1
Help
← →
Esc
Exit
The table below describes the parameters in this screen. Settings in boldface are the default and suggested
parameter settings.
Parameter
User Password is
Supervisor Password is
Set User Password
Set Supervisor Password
Primary HardDisk Security
Password on Boot
NOTE: When you are prompted to enter a password, you have three tries before the system halts. Don't forget
your password. If you forget your password, you may have to return your notebook computer to your
dealer to reset it.
Chapter 2
PhoenixBIOS Setup Utility
Main
Advanced
Clear
Clear
[Enter]
[Enter]
[Disabled]
[Disabled]
Select Item
↑ ↓
Select Menu
Shows the setting of the user password.
Shows the setting of the supervisor password.
Press Enter to set the user password. When
set, this password protects the BIOS Setup
Utility from unauthorized access.
Press Enter to set the supervisor password.
When set, this password protects the BIOS
Setup Utility from unauthorized access.
Shows the setting of the primary hard disk
Security.
Defines whether a password is required or not
while the events defined in this group
happened. The following sub-options are all
requires the Supervisor password for changes
and should be grayed out if the user password
was used to enter setup.
Security
F5/F6
Change Values
Enter
Select
Sub -Menu
Description
Boot
Exit
Item Specific Help
Supervisor Password
controls accesses of the
whole setup utility.
It can be used to
boot up when Password
on boot is enabled.
F9
Setup Defaults
F10
Save and Exit
Option
Clear
or Set
Clear
or Set
Disabled
or Enabled
Disabled
or Enabled
35
Advertisement
Table of Contents
