Light Bulb Changing - Kenmore 2029319 - Canister Vacuum Use And Care Manual

TO CLEAN AGITATOR:
NOTE: In order to keep cleaning efficiency
high and to prevent damage to your vacuum
cleaner, the agitator must be cleaned every_
time the belt is changed
The agitator must also be cfeaned according
to the following schedule:
Vacuum Cleaner Use Clean Agitator
HEAVY - every week
(used daily)
MODERATE _ every month
(used 2-3 times/week)
LIGHT - every 2 months
(used 1 timetweek)
IMPORTANT
Disconnect vacuum cleaner from
electrical outlet. Check and remove hair,
string and lint buitd-up frequently in the
Power-Mate agitator and end cap areas
Remove any dirt or debris in the belt path
area or in the brush roller area,,
Carefully remove any string or debris
located on the agitator or end caps.,
AGITATOR ASSEMBLY
_ Endt Cap Belt Path q
LIGHT BULB CHANGING I
1,,Remove Power-Mate cover as shown in
BELT CHANGING AND AGITATOR
CLEANING section.
2,, Push in and turn
bulb counterclock-
wise, then puU out
to remove,
_:_/_rn I / 3. Push in and turn
butb cfocl_wise, to
_ eplace Bulb must
not be higher than
15 Watts(t30 Volts),
4,,Reinstall Power-Mate cover as shown in
BELT CHANGING AND AGITATOR
CLEANING section.,
NOTE: See PARTS AND FEATURES for
bulb number,
18