Kenmore 2029319 - Canister Vacuum Use And Care Manual page 8

CANISTER
1. Open the canister hood
2. Check to see that the dust bag is properly
installed See BAG CHANGING for instruc-
tions
3. Check to see that the motor safety filter is
properly installed. See MOTOR SAFETY
FILTER CHANGING for instructions
HOOD AND TOOL
STORAGE COVER
It is normal for the canister hood and tool
slorage cover to come off when opened fur-
ther than needed. Line up the hinge slots,
insert the hinges into the slots, and close
the hood and tool storage cover to reinstall.
CAUTION
Never open canister hood with the tool
storage cover open. This wilt help to
prevent damage from occurring to the
canister hood andlor tool storage cover,
HOSE
1. Line up the
hose latch tab
and notch in can-
ister hood and
insert hose into
canister until it
snaps in place°
Latch
Tab
Notch
To remove: Lift
hose latch tab upward and pull up on hose
Handle
Lock
2. Insert handle
into wand until
lock button
snaps in place.
Be sure hose
is not twisted.
To remove:
Handle
Press handle
Q.ick quick release
Release._ button and pull
up on handle
To store:
Disconnect hose from wands and canister to
prevent stress on hose during storages.
Store hose in a loosely coiled position so
the hose covering is not stressed