Light Bulb Changing; Agitator Servicing - Kenmore 116.22263C Owner's Manual

PIÈCES ET CARACTÉRISTIQUES
Il est important de connaître les pièces et les caractéristiques de l'aspirateur pour l'utiliser correctement et en
toute sécurité. Lire cette section avant de l'utiliser
Objet Pièce Nº.
aux Etats-Unis
Ampoule 20-5240
Courroie 20-5218
Power-Mate®
Tube
télescopique
Collet
Pedale de
relâche de
la rallonge
(Non illustré)
Pédale de
hauteur de poils
Pédale de
relâchement
de manche
Numéros de
modèle/série
Power-Mate (Au bas) ®
Pièce Nº.
au Canadá
20-40600
20-40118
Relâche rapide
Bouton d'ajustement
de longueur du tube
Courroie
Éclairage
Indicateur de
hauteur de poils
Protecteur de
surchage
Bouton de remise
en circuit
Nettoyeur de bords
(Non illustré)
Détecteur de
poussière
4

LIGHT BULB CHANGING

®
1. Remove Power-Mate cover as shown in
BELT CHANGING AND AGITATOR
CLEANING section.
2. Push in and turn
Push In
And Turn
bulb counterclock-
wise, then pull out
to remove.

AGITATOR SERVICING

WARNING
Electrical Shock Or Personal Injury
Hazard
Disconnect electrical supply before
performing maintenance to the vacuum
cleaner. Failure to do so could result in
electrical shock or personal injury from
vacuum cleaner suddenly starting.
TO CHECK THE BRUSHES
When brushes
are worn to the
level of the base
support bars,
replace the
agitator
assembly.
Base Support Bars
3. Push in and turn
Push In
And Turn bulb clockwise, to
replace. Bulb must
not be higher than
15 Watts(130 Volts).
®
4. Reinstall Power-Mate cover as shown in
BELT CHANGING AND AGITATOR
CLEANING section.
NOTE: See PARTS AND FEATURES for
Bulb number.
TO REPLACE AGITATOR
ASSEMBLY
1. Remove Power-Mate ® cover, belt and
agitator assembly. See "To Remove Belt" in
BELT CHANGING AND AGITATOR
CLEANING.
2. Replace agitator assembly.
3. Reinstall belt and Power-Mate® cover.
See "To replace belt" in BELT CHANGING
AND AGITATOR CLEANING.
19